Fire Alarm Service

Get A FREE Quote

Residential and Commercial Fire Alarm Service & Life Security

Go Safer Security fire system engineers make sure that each project is correctly estimated and completed on schedule. Go Safer Security fire system engineers have the experience that protects an installation project from cost overruns and expensive delays.

UL Certified Monitoring – Central Station 24/7 Hour Monitoring

A fire alarm system is a requirement for most commercial properties. Go Safer Security has trained and state licensed fire alarm engineers that have the technical experience to service your fire alarm system(s), including semi-annual and annual fire alarm inspections.

Go Safer Security is the sure way to get your fire alarm service without delays. You deserve the peace of mind that comes with being protected by our systems. We have been successful for a reason. We get the job done. We take pride in taking care of our clients and in protecting their businesses

Fire Alarm Service and Security FAQs

A fire alarm system is an essential safety feature designed to detect smoke, heat, and/or carbon monoxide in a building and houses. It works by monitoring the environment for any changes in temperature or air quality that could indicate a potential fire. When a change is detected, the system triggers an alarm that alerts occupants of the danger.

The basic components of a fire alarm system include sensors, control panels, and alarms. Sensors are placed throughout the establishments and monitor for any changes in temperature or air quality that could indicate a fire. If a change is detected, it will send an alert to the control panel which then triggers an alarm. The type of alarm used can vary depending on the size and layout of the building but typically includes both audible and visual warnings such as sirens or flashing lights to notify occupants of the danger.

Fire alarm systems are essential for keeping establishments safe from potential fires and should be inspected regularly to ensure they are working properly.

A fire alarm and a smoke alarm are two very different safety devices. A fire alarm is designed to detect heat, flames, or smoke in the air, alerting people in the building of a potential fire. Fire alarms can be wired into the building’s electrical wiring, connected to its sprinkler system, or powered by batteries. Smoke alarms on the other hand are designed to detect smoke particles in the air and sound an audible alert when they sense them. They will not detect heat or flames, but can provide an early warning of a potential fire before it becomes too large. Both devices are essential for keeping your home or business safe from fires and should be installed and maintained regularly for optimal safety.

Fire alarms should be placed in every room of a house and office, as well as in hallways and other common areas. The ideal placement for a fire alarm is on the ceiling, at least four inches away from any wall or obstruction. It’s also important to place them between four and twelve inches below the ceiling. This ensures that smoke will reach the alarm quickly, enabling it to sound an alert sooner.

In addition to placing fire alarms in each room, it’s also important to have them connected together in an interconnected system. This way if one alarm is triggered, they all will sound simultaneously. This will give everyone in the building more time to evacuate safely if a fire breaks out.

Finally, it’s essential that all fire alarms are tested regularly and given regular maintenance checks by a professional technician. This will ensure that they are working properly and can provide maximum protection in case of an emergency situation.

The number of fire alarms you should have in your house and buildings depends on the size and layout of the structure. Generally, it is recommended to install one smoke alarm per floor, plus one in each bedroom. If there are any areas with high ceilings or other obstacles that could impede smoke from reaching an alarm, additional alarms should be installed.

It is also important to consider installing a combination of both ionization and photoelectric smoke alarms. Ionization alarms are best for detecting fast-burning fires, while photoelectric alarms are better for detecting slow-burning fires. This way, you can ensure that all types of fires will be detected quickly and accurately.

Finally, it’s important to remember to test your fire alarms regularly to make sure they are functioning properly.

Fire alarm systems should be inspected and tested regularly to ensure they are working correctly. The exact frequency of inspections will depend on the type of system, local regulations, and other factors. Generally speaking, fire alarms should be inspected and tested at least once a year.

In addition to annual inspections, it is important to conduct more frequent tests and maintenance checks throughout the year. This could include monthly visual inspections of all components and weekly testing of audible alarms. It is also important to check batteries regularly and replace them as needed.

Taking these steps can help ensure that your fire alarm system is always in good working order and ready to respond in the event of an emergency. Regular inspection and maintenance can also help reduce false alarms, which can cause disruption and confusion in the workplace or home.

Pin It on Pinterest

Request a Free Quote