yandex image

GET OUR BEST DEAL OFFER FOR YOUR BUSINESS

We offer top of the line surveillance and security solutions, so you can always stay informed about what’s happening around your business property.

Fire Sprinkler Systems Service

Go Safer Security is a top-rated fire sprinkler systems installation, maintenance and repair company based in Maryland. We offer reliable, cost-effective solutions to protect your property from fire and smoke damage.
Our team of professional technicians have decades of experience and are committed to providing top-notch customer service.

Fire Sprinkler Systems Service​

Our team of professional technicians have decades of experience and are committed to providing top-notch customer service

300w x 280h 4
375h x 464w 5

What is a fire sprinkler system?

A fire sprinkler system is a type of fire protection system that uses water to extinguish fires. When a fire occurs, the system will activate and send a stream of water onto the fire to put it out.

Typical layout for dry and Wet Type Sprinkler Systems A fire sprinkler system is different than a fire alarm system in that a fire alarm system will activate and send alerts to people in the area, while a fire sprinkler system will only activate and send water onto the fire. This is important to remember if you have a fire alarm system that is connected to a fire sprinkler system; the fire alarm system will activate even if the fire sprinkler system is not activated, which could lead to confusion and potential safety hazards. If you’re in the process of purchasing a home and are worried about the safety of your family in the event of a fire, a fire sprinkler system is a must-have!

Types of Fire Sprinkler Systems

There are several different types of sprinkler systems, depending on the application. These include:

  • Deluge sprinklers- sprinkler heads are always open and the pipes fill with water when activated. Good for hazardous material storage or other areas with high hazards, like aircraft hangars.
  • Dry pipe sprinklers- pipes fill with water when the system is activated. Since the pipes are dry, this system works well for unheated buildings, like warehouses, where full pipes might burst in cold temperatures.
  • Wet pipe sprinklers- pipes are constantly full. These systems are used in high-traffic, high-occupancy buildings like hotels, office buildings, and high-rises.
  • Pre-action sprinklers- activated by supplemental fire detection system. Used to mitigate damage of sensitive areas that could be caused by accidental activation. This includes museums, libraries, and other locations where water damage needs to be minimized.

How fire sprinkler systems work? (3D Animation)

Fire Sprinkler Systems Explained

300w x 280h 4

Fire sprinkler systems are a critical part of fire protection services in Maryland. They provide an efficient and effective way to suppress and extinguish fires. Fire sprinkler systems are designed to detect and respond to a fire, releasing the necessary amount of water to put out the fire. With these systems in place, businesses can be sure that their property and employees are safe from the dangers of a fire.

A 3D animation outlining how fire sprinkler systems work is an invaluable resource for anyone looking to understand the basics of fire protection services in Maryland. It provides an easy-to-understand visual representation of how these systems function, from detection to activation and suppression. This animation is especially useful for business owners, facility managers, and other personnel responsible for maintenance and upkeep of fire sprinkler systems. It can help them understand the importance of regular testing and maintenance to ensure that the system is operating properly and efficiently.

In addition to providing a comprehensive overview of how fire sprinkler systems work, the 3D animation also highlights the importance of inspecting and maintaining fire extinguishers. Fire extinguishers are key components of any fire protection system and should be checked regularly to ensure they are in working order. Regular maintenance helps to ensure that the fire extinguishers are able to effectively contain and extinguish any fires that may occur.

The importance of understanding how fire sprinkler systems work cannot be overstated. By viewing a 3D animation outlining the process, business owners and facility managers can be sure that their fire protection systems are up to date and working properly. Additionally, they can be sure that their fire extinguishers are properly maintained and capable of providing the necessary amount of fire suppression.

For businesses in Maryland, the 3D animation outlining how fire sprinkler systems work is an invaluable resource. It provides a comprehensive overview of how these systems function and highlights the importance of regular inspections and maintenance. By viewing the animation, business owners and facility managers can be sure that their fire protection systems are up to date-and functioning properly. Additionally, they can be sure that their fire extinguishers are properly maintained and capable of providing the necessary amount of fire suppression.

ISS 21398 17161

Fire Sprinkler Systems FAQs

The frequency at which a fire suppression system should be replaced depends on the type of system, as well as local building codes and regulations. Generally speaking, most fire suppression systems should be inspected annually by a certified technician to ensure that they are in proper working order.

In addition, many systems require a full replacement after 10 years of service or when the manufacturer recommends it. This is to make sure that the system is still effective and able to reliably protect the building from potential fires. If the system has been exposed to any type of water damage or other hazards, it may need to be replaced sooner than 10 years.

It’s important to keep up with regular maintenance and inspections for your fire suppression system in order to ensure that it is functioning properly and providing adequate protection for your building. A certified technician can help determine when a replacement is necessary in order to keep your property safe.

Fire sprinkler systems are designed to last for a long time, with many systems lasting from 10 to 20 years or more. However, the actual lifespan of a fire sprinkler system depends on several factors, including the type of system installed and the quality of its installation.

For example, a wet pipe system typically lasts longer than a dry pipe system because it is less likely to become blocked by debris or corroded over time. Additionally, if the fire sprinkler system is properly maintained and inspected regularly, this can help extend its life expectancy. Regular maintenance should include checking for signs of corrosion or wear and tear as well as testing all components to make sure they are functioning properly.

In general, it’s important to remember that a fire sprinkler system is an important part of any building’s safety and should be taken care of accordingly. With proper maintenance and regular inspections, you can help ensure that your fire sprinkler system will provide reliable protection for many years to come.

Maintaining fire sprinklers is an important part of ensuring they will work properly in the event of a fire. To keep them in good working order, there are several steps that should be taken.

First, it is important to have the sprinkler system inspected and maintained regularly by a qualified professional. This should include checking for any signs of corrosion or other damage, testing the water pressure, and making sure all components are functioning properly.

Second, it is important to keep the area around the sprinkler system clear so that it can operate without obstruction. This includes keeping furniture and other objects away from sprinkler heads and making sure no debris has built up inside the pipes or valves. It is also important to check for any blockages in the system on a regular basis.

Finally, it is important to make sure that all sprinkler heads are kept clean and free of dust or dirt buildup. This can help ensure that they will work correctly when needed.

Yes, fire sprinklers do turn on automatically in the event of a fire. Fire sprinklers are designed to detect heat and smoke levels and will activate when they reach a certain level. The amount of heat or smoke required to trigger the system varies from system to system depending on its design and purpose.

Fire sprinklers are an important part of any building’s fire safety plan, as they can help contain a fire before it spreads too far. Once activated, the sprinkler system releases water onto the affected area, helping to extinguish flames and reduce smoke levels. This helps protect both people and property from further damage caused by the fire.

In addition to activating automatically, many modern fire sprinkler systems also have manual override switches that can be used to manually activate the system if needed. This is especially useful in cases where an immediate response is required prior to the automatic activation of the system.

Generally, most sprinkler systems are designed to activate when the temperature reaches a certain threshold. This threshold is typically set between 135-165°F. To ensure that the system is functioning properly, it’s important to regularly test the sprinklers and adjust the temperature as needed.

The sprinkler system should be checked regularly to make sure it is working correctly and that it is not set too low or too high. If the temperature setting is too low, then the sprinklers may not activate in time during a fire emergency. On the other hand, if it’s set too high, then you may experience false alarms or unnecessary water damage from accidental activation of the sprinklers.

It’s also important to note that some newer models of sprinkler systems are equipped with advanced features such as heat detectors which can detect rapid increases in temperature and activate even before reaching the preset threshold. This provides an additional layer of protection for your property in case of a fire emergency.

The purpose of a fire panel is to monitor and control fire alarms, sprinklers, and other fire protection systems in a building. Regular fire panel inspection can ensure that the system is functioning properly, detect potential issues early on, and minimize the risk of damage or loss caused by fire. The benefits of regular fire panel inspection include increased safety and reduced property damage in case of a fire emergency.

No, a fire sprinkler system and a fire alarm system are not the same. The fire sprinkler system is designed to extinguish a fire while the fire alarm system is designed to alert people in the event of a fire.

GET A FREE QUOTE TODAY

Call 1-800-GO-SAFER (467-2337) and speak with our GSS Specialist or complete the form and we will contact you.

Pin It on Pinterest

FREE QUOTATION

Fill up our Free Quotation Form and our Specialist will get back to you.

GRAB DEAL NOW

Fill up our Form and our Specialist will get back to you.

Are you business or Home Owner

Answer these question and get customized security solutions and offers.

I’m most interested in:

(select all that apply)

How many doors and windows do you need to protect?
Last thing. Let’s see if Go Safer Security is in your area!

Providing this information will allow us to see if we offer services in your area along with any special promotional offers.

Need A Free Quote for your Business?

What type of business do you have? This will help us determine the specific needs of your business and recommend cameras that are best suited for your industry.